We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.
For most concrete patios, the best patio paint is KILZ Porch & Patio Floor Paint.
It’s 100% acrylic latex, it’s rated 4.6/5 from about 2,800 Amazon ratings, and you can walk on it the next day.
If your patio also takes car tires or heavy furniture, step up to the KILZ 1-Part Epoxy instead.
And if your slab is cracked or slippery, the KILZ Decorative textured coating hides more… but it needs about four times as much paint.
That’s why we sorted the picks by how many gallons you’ll actually have to buy.
How we chose these patio paints
We didn’t test these paints ourselves.
We read each maker’s technical data sheet for coverage and dry times, then checked Amazon ratings and the review summaries Amazon shows on each listing.
Every number below comes from those sources, listed at the end with the date we checked them.
We only picked paints the maker says are made for horizontal concrete outdoors, since wall paint on a patio peels fast.
Quick comparison: coverage, walk-on time and gallons for a 10×20 ft patio
A 10×20 ft patio is 200 square feet.
The last column uses the maker’s coverage range for rough concrete, because most outdoor slabs are rough (broom-finished or weathered).
| Paint | Coverage per gallon | Light foot traffic | Gallons per coat, 200 sq ft rough slab | Amazon rating (Nov 2026) |
|---|---|---|---|---|
| KILZ Porch & Patio Floor Paint | 200-300 sq ft rough, 300-400 smooth | Avoid heavy traffic 24 h, normal use after 72 h | 0.7-1.0 | 4.6/5, ~2,800 ratings |
| KILZ 1-Part Epoxy Concrete & Garage Floor Paint | 300-400 sq ft rough, 400-500 smooth | 24 h (cars after 7 days) | 0.5-0.7 | 4.4/5, 3,142 ratings |
| Rust-Oleum Concrete & Garage Floor Paint + Primer | 180-220 sq ft porous, 300-400 smooth | 12-16 h (cars after 5 days) | 0.9-1.1 | 3.9/5, 185 ratings |
| KILZ Decorative Slip-Resistant Concrete Coating | 40-60 sq ft (for the 2 required coats) | 24 h (cars after 72 h) | about 4 gallons total for both coats | 3.8/5, ~950 ratings |
Buy a little extra on top of these numbers, since the makers’ coverage figures don’t include waste from rollers or sprayers.
1. KILZ Porch & Patio Floor Paint: best for most patios
This is the safe pick for a plain concrete patio that only sees feet, chairs and the grill.
It’s a low-luster acrylic latex, which means a soft sheen that’s easy to roll on and cleans up with water.
Skip it if you park on the slab, because KILZ says it’s not for areas with car tires.
Pros
- Dries to the touch in 1 hour, recoat in 4-6 hours (maker data).
- Highest rating here: 4.6/5 from about 2,800 Amazon ratings.
- Amazon’s review summary says buyers often got good coverage in one coat.
Cons
- Some reviewers report chipping and peeling, per Amazon’s summary.
- KILZ warns sealed surfaces can get slippery when wet.
2. KILZ 1-Part Epoxy: best if your patio doubles as a driveway
Pick this one when the patio connects to a carport or you drag heavy planters across it.
“1-part epoxy” means it’s a water-based paint with epoxy mixed in, so there’s no two-can mixing like a real garage epoxy kit.
It also goes the furthest per gallon of anything here.
Skip it for steps or walls, since KILZ says not to use it on vertical surfaces.
Pros
- Resists hot tire pick-up, the peeling you get when warm tires lift paint (maker data).
- 300-500 sq ft per gallon, the best coverage of the four.
- 4.4/5 from 3,142 Amazon ratings.
Cons
- Durability gets mixed feedback in Amazon’s summary, with some buyers reporting peeling.
- KILZ says no more than two coats, and tire areas may need a yearly touch-up.
3. Rust-Oleum Concrete & Garage Floor Paint + Primer: fastest back to use
This is the one to grab if you want people walking on the patio by tomorrow morning.
Rust-Oleum lists light foot traffic after 12-16 hours, which is the shortest wait here.
It’s paint and primer in one, so on clean bare concrete you don’t buy a separate primer.
Skip it if your slab is very porous, because it covers only 180-220 sq ft per gallon there.
Pros
- Light foot traffic in 12-16 hours, normal foot traffic in 24 (maker data).
- Resists hot tires, oil and gasoline, per the listing.
- Amazon’s summary says buyers like the coverage on driveways.
Cons
- Lowest rating count here: 3.9/5 from just 185 ratings.
- Some reviewers mention peeling and black marks that won’t wash off.
4. KILZ Decorative Slip-Resistant Coating: best for cracked or slippery slabs
Choose this when your patio looks rough and you’d rather hide it than repair it.
It’s a thick, gritty coating that leaves a stone-like texture and fills hairline cracks up to 1/8 inch.
The catch is coverage: one gallon covers only about 50 sq ft with the two coats it needs.
Skip it if your patio is uncovered and you can’t seal it, because some owners report water bubbles after rain.
Pros
- Textured, slip-resistant finish that KILZ recommends for pool decks and walkways.
- Fills hairline cracks up to 1/8 inch (maker data).
- Cars allowed after 72 hours, sooner than the epoxy.
Cons
- Lowest rating here: 3.8/5 from about 950 Amazon ratings, with complaints about adhesion and color.
- You’ll need a 1/4 inch adhesive roller, which KILZ says is required for the texture.
Which patio paint fits your slab
Start with what drives or rolls over the patio, then look at its condition.
- Only feet and furniture: KILZ Porch & Patio.
- Car tires or heavy carts: KILZ 1-Part Epoxy or Rust-Oleum.
- You need it usable fast: Rust-Oleum, with light traffic at 12-16 hours.
- Cracked, stained or slick concrete: KILZ Decorative, and budget for about 4 gallons per 200 sq ft.
Whichever you pick, most of the maker warnings are about prep.
KILZ says new concrete must cure at least 30 days before painting, and bare concrete should be cleaned and etched so the paint can grip.
KILZ also recommends painting when the air and surface are between 50 and 90°F, and out of direct sun.
If you’re still deciding on the patio itself, our deck vs patio comparison covers that choice.
Painting the furniture too? See our picks for aluminum patio furniture paint and picnic table paint.
Got a wood deck instead of concrete? Our deck paint for pressure treated wood guide is the better fit.
Patio paint FAQ
Can I use regular exterior paint on a concrete patio?
It’s not a good idea.
All four paints here are made for horizontal concrete that gets walked on, while house paint is made for walls.
How long before I can put patio furniture back?
KILZ says 72 hours for both the Porch & Patio paint and the 1-Part Epoxy before heavy use or moving furniture.
Rust-Oleum lists normal foot traffic after 24 hours.
When can I hose off a painted patio?
Wait about a month.
KILZ says to wait 4 weeks (Porch & Patio) or 30 days (1-Part Epoxy and Decorative) before washing.
Is patio paint waterproof?
Don’t count on it.
None of these makers sells them as waterproofers, and owners of the Decorative coating report water bubbles on uncovered slabs.
Sources
All checked November 8, 2026.
- KILZ Porch & Patio Floor Paint product page and technical data sheet: kilz.com, TDS PDF (coverage, dry times, car-tire warning, slippery-when-wet caution)
- KILZ 1-Part Epoxy product page and technical data sheet: kilz.com, TDS PDF (coverage, traffic times, 30-day concrete cure, two-coat limit, 50-90°F)
- KILZ Decorative Concrete Coating product page: kilz.com (40-60 sq ft per gallon, two coats, crack fill, adhesive roller, traffic times)
- Rust-Oleum Concrete & Garage Floor Paint + Primer technical data sheet (SKU 225380): rustoleum.com (coverage, traffic times)
- Amazon listings ASIN B01MQCGX1T and B01M4QY0MR (KILZ Porch & Patio, ~2,800 ratings, review summary), B01M9IQH10 (KILZ 1-Part Epoxy, 3,142 ratings, review summary), B0DW5CT6KG (Rust-Oleum, 185 ratings, review summary, features), B07BGMWYV6 and B07BF4MTXJ (KILZ Decorative, ~950 ratings, owner reviews on water bubbles)
- Gallons per coat: our calculation, 200 sq ft divided by each maker’s rough or porous coverage range